PavePad®

Sustainable stackable solutions for your terrace

New terrace in the garden or maybe a roof terrace?

Looking for a new terrace in the garden or perhaps a balcony or roof terrace? No matter if you choose to build with tiles or wooden planks, we will provide you with the best possible supporting solutions to your project with our PavePads. Our PavePad series elevates your terrace to the desired height and even provides an equal distance to your tiles with our environmentally friendly paving pads.

Many roof terraces have requirements about gratings in the paving. This, along with the use of granite, lava, or ceramic tiles with a difference of up to 5 mm in thickness, makes high demands on the paving pads: Each tile must be leveled individually. Our PavePads are particularly suitable for this task, because they are designed to handle four individual types of tile, at the same time. Each corner of the PavePad can be adjustet to fit the height of each individual tile. PavePads makes it possible to level your terrace floor, regardless of change of tiles, without having to do magic. We did it for you. Watch the video to see how easy it is to adjust the PavePads to equalize the level differences on your tiles.

PavePads kan vendes til at fiksere skruer, for at holde fast på strøer - PaveSystems

A clever solution for your wooden terrace

PavePad is also the perfect choice when you make terraces with wood or composite. The sustainable PavePads are made of Polyethylene High Density – PEHD which is a strong and non-toxic type of plastic. 

PEHD allows you to fasten the terrace directly into our PavePads with screws, without special brackets or pre-drilling for the screw. We use the best raw material for our PavePads, so you can easily work on your terrace. Lean more under Technique where you will find examples of wooden and composite terraces on joists.

The PavePad system is not hard to work with, and does not demand special knowledge or tools to implement. We have created an overview of tools you are going to need for your project. Go to Installation to find inspiration and guidance on how to construct your terrace, using PavePads.

The benefits of working with PavePad

  • PavePads can withstand temperatures up to 100°C and down to -50°C.
 
  • Can be used with tiles, wood or composite decks.
 
  • Protects your roof and roof membrane against UV radiation from the sun and direct wear and tear.
 
  • Using PavePads enables you to make your deck 100% level, in spite of roof inclination or curbs.
 
  • Drains the deck surface of water and prevents algae growth on your tiles.
 
  • Say goodbye to weeds as no sand or gravel is used under your terrace.
 
  • An easy, simple, and environmentally friendly construction.
 
  • Creates a uniform result and is easy to work with.
 
  • Strong materials which can withstand loads up to 1,200 kg on each PavePad.

 

PaveTerrace - 15 mm flisefod brugt sammen med PaveShim til en ny veranda
Miniaturebillede af en tagterrasse med blomstekasse og fliser, hvor der er brugt PavePad

The sustainable, easy, and affordable choice

The PavePad series is produced from a non-toxic material that lasts a long time and can be reused for new products when the old product is replaced. Read here how we work with Materials and Circular economy at PaveSystems. It is easy to work with PavePad and it does not demand high-level tools or knowledge. Our PavePads offer an affordable solution to your projects, as the many options for customizing the PavePad result in you needing fewer paving pads, and saving space under the pavement.

Before you start your project, we recommend that you look at our 10 Rules of Thumb for establishing a roof terrace. We have gathered a user-friendly overview of things to consider before you start your project. There is also a note about the carrying layer. Click here to read more. Remember that you can always look at the Gallery for inspiration or download free brochures , e.g., our QuickGuide, to guide you through your project.

Good luck on your PavePad project!

Ta' kontakt til os og vi vil finde den rette løsning til jer

Har du brug for hjælp til at finde den helt rigtige løsning til dig?
Kontakt os på +45 8637 7133 eller send os en mail via formularen her for en uforpligtende snak om mulighederne.

PavePad - Flisefødder fra 1,5 til 90 mm højde til tagterrasse - PaveSystems
Justerbar flisefødder til terrasse fra 1,5 til 7,5 mm - PavePad
Justerbar flisefødder fra 15 - 90 mm højde - PavePad

Information about the different PavePads

Mål på PaveShim

PaveShim 1.5 mm

PavePad – height/thickness 1.5 mm
Diameter 180 mm
Max. load per PavePad 1,200 kg
Temperature range -50/100°C
Strap color YELLOW

Gul strapbånd til PaveShim - PaveSystems

A shim is used for fine-tuning. The shim can be cut or pulled apart by hands as needed, eg. in quarter, half, or three-quarter pieces. It can be inserted in the top, middle, or bottom layer.

A shim can compensate your substrate and uneven tiles. This solution is unique for PavePad

Note: Max. 3 shims per PavePad

NB. Max. Load exceed the most common roof bearing capacity; therefore, your roof construction and the load-bearing capacity of the substrate should take in counts. A shim is used for fine adjustment. The Shim can be cut or torn apart by hand into quarters, halves or three quarters to fit the needs. It can be inserted from top, mid or bottom layer, compensating for both Tile/slab and underlayer. This feature is unique for PavePad product.

Note: Max. 3 shims per PavePad

NB.max. belastning overstiger de fleste tages bæreevne, hvorfor belastningen afhænger
af selve tagkonstruktionens og underlagets bæreevne.

Mål på PaveDamper

PaveDamper 4.5 mm

PavePad – height/thickness 1.5-4.5 mm
Diameter 180 mm
Max. load per PavePad 1,200 kg
Temperature range -50/100°C
Strap color GREEN

Grøn strapbånd til PaveDamper - PaveSystems

PaveDampers are for tile use in case of uneven or crooked tiles. Noise-reducing. Absorbs footsteps, noises and reduces vibrations. For renovation and new construction. Ideal for tiles and natural stone.

Roof terrace solutions with PaveDamper are used to dampen the sound of the tiles.

This optional accessory means: 1 PaveDamper per stack as top layer.

NB. The maximum load capacity of the PavePad exceeds most roofs maximum weight capacity and is not to be mistaken with this. Be sure to investigate the structural limits of the building prior to initiation.

Flisefod mål over størrelsen

PavePad 7.5 mm

PavePad – height/thickness 7.5 mm
Diameter 180 mm
Max. load per PavePad 1,200 kg
Temperature range -50/100°C
Strap color RED

Rød strapbånd til 7,5 mm PavePads - PaveSystems

PavePad 7.5 mm is used as adjustment and leveling – not as a starting layer.

The maximum load capacity of the PavePad exceeds most roofs maximum weight capacity and is not to be mistaken with this. Be sure to investigate the structural limits of the building prior to initiation.
15 mm højde og 180 mm i diamenter flisefod

PavePad 15 mm

PavePad – height/thickness 15 mm
Diameter 180 mm
Max. load per PavePad 1,200 kg
Temperature range -50/100°C
Strap color WHITE

Hvid strapbånd til 15 mm PavePad - PaveSystems

PavePad 15 mm is used as the starting layer (minimum height). The 15 mm is to ensure space for dust and dirt to travel to drainage. The PavePad itself is constructed so that it is self-draining, ensuring no stale water remains.

The PavePad 15 is constructed with the unique ability to be turned towards another PavePad 15, 45, 90 mm in order to create a straight surface for placing beams. Based on a minimum of 30 mm it is possible to establish a wooden terrace that will not get into contact with water. Timber beams can be fixed directly to the PavePad with wood screws. When applying this technique further height can be achieved by stacking from both top and bottom layer with the other PavePad elements.

The maximum load capacity of the PavePad exceeds most roofs maximum weight capacity and is not to be mistaken with this. Be sure to investigate the structural limits of the building prior to initiation.

Flisefod i 45 mm højde og 180 mm i diameter

PavePad 45 mm

PavePad – height/thickness 45 mm
Diameter 180 mm
Max. load per PavePad 1,200 kg
Temperature range -50/100°C
Strap color BLUE

Blå strapbånd til 45 mm PavePad - PaveSystems

PavePad 45 mm is, like the 15mm, made to drain rainwater and can be divided into halves for sides and into quarters for corners of the terrace.

The maximum load capacity of the PavePad exceeds most roofs maximum weight capacity and is not to be mistaken with this. Be sure to investigate the structural limits of the building prior to initiation.
Flisefod i 90 mm i højde

PavePad 90 mm

PavePad – height/thickness 90 mm
Diameter 180 mm
Max. load per PavePad 1,200 kg
Temperature range -50/100°C
Strap color BLACK

Sort strapbånd til 90 mm PavePad - PaveSystems

PavePad 90 mm is made to achieve height in a rapid workflow ensuring both tempo in the process and better economy as well. It is simple to use and you save money.

The maximum load capacity of the PavePad exceeds most roofs maximum weight capacity and is not to be mistaken with this. Be sure to investigate the structural limits of the building prior to initiation.

PavePad solutions for your roof terrace - roof paving pads

Are ou in need of guidance and inspiration on how to implement the PavePads, see here for some suggestions of use. You can also browse our Gallery, for more inspiration and options.

Other products and solutions